Troubleshooting - Klarstein Lannister Manual Del Usuario

EN
20
Cleaning and stop use.
• Make sure to unplug the appliance before cleaning and long time off use.
• Use a damp cloth to clean both the interior and exterior of the appliance.
• Water tank cleaning.
• Unscrew the nut of water outlet, drain off the water.
• Pour clean water into the water tank, use a clean cloth to wipe water tank around.
Pour clean water again until the flowing out water is clean, and then drain off water
and grip the nut.
• Do not use organic solvents, boiling water, cleaning agents, strong acids, strong
acid and Alkali etc substan- ces for cleaning.
• If ice machine will be off use for a long time, you should unplug the appliance,
drain off the water and dry the appliance with a clean cloth, store the ice maker in
a clean place.

TROUBLESHOOTING

Faults
WORK indicator is not
light.
ICE FULL indicator is light.
Reason
Power Source is not
switched on.
Ice fullness.
Low-temperature
protection (temperature is
lower than 5°C).
Treatment
Check the power supply
matches
Check the power cord is
connected correctly
Internal components are
damaged. Maintenance in
professional department.
Remove the full Ice cube.
Move the Ice maker to a
warmer place, where the
ambient temperature is
higher than 5°C.