HealthSmart DigiScan Manual De Uso página 16

Guidance and manufacturer's declaration – electromagnetic immunity
The device is intended for use in the electromagnetic environment
specified below. The customer or the user should assure that it is used in
such an environment.
Conducted R
F lEC 61000-4-6
Radiated RF lEC
61000-4-3
NOTE I: At 80 MHz ends 800 MHz. the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
a) Field strengths from fixed transmitters, such as base stations for radio (cellular/
cordless) telephones and land mobile radios, amateur radio, AM and FM radio
broadcast and TV broadcast cannot be predicted theoretically with accuracy. To
3 Vrms
150 kHz to 3 V
80 MHz
3 V/m
80 MHz to 3 V/m
2.5 GHz
Portable and mobile RF
Communications equipment should
be used no closer to any part of the
device, including cables, than the
recommended separation distance
calculated from the equation
applicable to the frequency of
the transmitter. Recommended
separation distance.
d=[ 3.5 ] p
V1
d=[ 3.5 ] p
E1
d=[ 7 ] p
E1
Where P is the maximum output power
rating of the transmitter In watts (W)
according to the. Transmitter manu-
facturer and d is the recommended
separation distance in meters (m). Field
strengths from fixed RF transmitters,
as determined by an electromagnetic
site survey, a should be less than the
compliance level in each frequency
range.b Interference may
occur In the vicinity of
equipment marked with
the following symbol:
16
80 MHz to 800 MHz
800 MHz to 2.5 GHz