Safety Instructions - Before Working; Safety Instructions - Operating; Safety Instructions - While Working; General Safety Instructions - ATIKA BF 31-4T Manual De Uso

Visor
−
Ear protection
−
Protective jacket with striking colour
−
Cut-proof trousers and gloves
−
Anti-slipping cut-proof boots (safety shoes) with steel-
−
toes
Fire extinguisher and spade (sparks may occur during
−
working)
First-aid material
−
Mobile telephone if required
−
Safety instructions
Carry out the following checks before the initiation and
regularly during the working process. Observe the relevant
sections in the operating instruction manual:
• Is the device assembled completely and properly?
• Is the device in good and safe condition?
• Are the handles clean and dry?
• Check the machine for loose fasteners, fuel leakage and
damaged parts such as cracks in the tool.
• Before starting your work make sure that:
no other persons, children or animals stay within the
−
working area,
you can always step back without any barriers,
−
your standing area is free from foreign objects,
−
brushwood and branches,
you always have a secure standing position.
−
• Is the workplace free of risks to stumble? Keep your
workplace in an orderly condition! Untidiness can result in
accidents. Risk of stumbling.
• Before trimming, remove all foreign objects (e.g. stones,
branches, wires, etc.). While working watch out for further
foreign objects.
• Take into consideration environmental influences:
Do not work under insufficient light conditions (e.g. fog,
−
rain, snow flurry or twilight). If you can no longer see
details within the falling area
Do not use the device near inflammable liquids or gases
−
- Risk of fire.
The operator is responsible for accidents or risks which
−
occur to other persons or their properties.
Safety instructions - operation
• Never saw with only one hand. Hold the device always
firmly with both hands.
• Never work
with stretched arms
−
on hardly accessible places above shoulder height
−
standing on a ladder, a staging or a tree.
−
• Always work on non-skid and flat ground.
Avoid abnormal posture. Provide a safe standing position
and keep at any time the balance
• Change your working posture from time to time.
• To have a break stop the machine and place it so that
nobody is at risk. Secure the device against unauthorized
access.
22
–
before working
risk of accident.
–
Safety instruction
• Never work alone. Keep acoustic and visual contact to other
persons at all times to allow immediate first aid in emergency
cases.
• Immediately stop the engine at imminent danger or in
emergency cases
• Never leave the device running unattended.
• This petrol grass trimmer produces harmful
substances! Never run the device in closed or
poorly ventilated rooms. Provide for a sufficient
change of air when working in wells, trenches or
confined spaces. There is the risk of carbon monoxide
poisoning or death by suffocation.
• Immediately stop working when you feel unwell (e.g.
headache, dizziness, nausea, etc.). Otherwise there is an
increased risk of accidents.
• Make sure that the cutting tool is free before starting the
engine.
• Before starting the engine, make sure that your hands and
feet are kept at a safe distance to the cutting tool.
• Caution! The cutting tool may after-run. Do not try to slow it
down by hand.
• Start cutting only when the cutting tool has reached the full
rotational speed.
• Do not overload the machine! You work better and safer in
the given performance range.
• Take breaks when working so that the engine can cool down.
• Do not place a hot machine in dry grass or onto inflammable
objects.
• Never touch the silencer and the engine while the machine is
running or shortly after it was stopped. Danger of burning!
• Never bring the cutting tool in contact with rigid objects
(stones, trunks).

General safety instructions

• Stop the machine and remove the spark plug connector
from the spark plug when
the cutting tool comes in contact with stones, nails or
−
other foreign objects
carrying out repair works
−
maintenance and cleaning
−
removal of faults
−
transport and storage
−
replacing the cutting tool
−
leaving the machine (also during temporary interruption)
−
• Maintain the machine carefully:
Follow the maintenance instructions and the instructions
−
for tool exchange.
Keep the handholds dry and free from resin, oil and
−
grease.
Always keep the machine including tool in a good
−
condition.
Make sure to check the machine before any use and after
−
dropping or other impacts to ensure that it is in a proper
condition.
• Check the machine for possible damage:
Before continuing to use the machine, the protective
−
devices must be inspected to ensure that they work
–
while working