Setup; Using The Mounting Strip - Petsafe PBC17-14779 Manual De Funcionamiento

Setup

The Indoor Bark Control should be placed facing the dog and at a level equal to the dog's
height to be most effective.
The unit includes provisions for hanging or can be adhered using the Self-Adhesive Hook and
Loop Mounting Strip. The Indoor Bark Control can also stand alone. For best results, the area
between the unit and your dog should be free of any large obstacles.

Using the Mounting Strip

1. The Indoor Bark Control includes a provision on the back to adhere the Mounting Strip.
2. Gently pull the two pieces of Mounting Strips apart.
3. Peel the tape from one side of the Mounting Strip and press firmly in place on the back of
the Indoor Bark Control.
4. When adhering to the wall, door frame, etc., clean and dry the surface before application.
5. Peel tape from the second side of the Mounting Strip and press firmly in place.
6. Simply press the two Mounting Strips together.
7. Adhesive reaches maximum strength after 24 hours.
10 www.petsafe.net