Dometic PW1100 Instrucciones De Uso página 17

PW1100
➤ Clean the awning fabric regularly to remove any dirt and dust:
– To do this, use water with 30 ml detergent and 30 ml bleach for 10 l of water.
– Soap down the fabric and leave the liquid to soak in for five minutes.
– Rinse thoroughly with clean water.
Make sure that the detergent with the bleach is completely washed off.
Otherwise it can damage the fabric.
– Leave the fabric to dry.
I
NOTE
The manufacturer recommends:
To clean the cloth use the Dometic awning cleaner
(ref. no. 9600000165, available from your service partner).
7.2 Lubricating
➤ If required, lubricate the joints of the awning with paraffin wax, teflon oil or
silicone oil.
7.3 Checking
!
WARNING!
Do not use the awning if any settings or maintenance work are required.
If you discover any damage, please contact a service partner in the
respective country (see addresses on the back of the manual).
1. Check the awning regularly for any imbalance and wear, as well as damage to
major parts.
2. Check the awning regularly:
– Is the fabric free of damage?
– Are the arms and lead rail free of damage with no signs of wear?
– Does the awning close properly?
I
NOTE
Dometic accessories such as sealing joints or foam strips are subject to
environmental wear and tear. This is not an evidence of poor quality.
To ensure the function of these parts, Dometic recommends replacing
rubber seals and foam strips every 5 years.
EN
Cleaning and maintenance
17