Hayward ZKD Serie Manual De Instalación página 9

Display during Operation
Operating mode
•
Timer
•
Alarms and Level
statuses = level alarm
•
Flow = flow alarm
Paragraph 4 – Setting the Maximum Flow
Programming
PROG
Pump Functions -­‐
Max flow rate Max flow rate
P100%
P100%
-­‐
Max flow rate
F320s/m
Paragraph 5 – Setting the Alarm Relay
Programming
PROG
Pump Functions
-­‐
Max flow rate
-­‐
P100%
Alarm Relay
N.Open -­‐
Hayward Flow Control
by pressing the
dosage activation time, for the time (in seconds) set using the
keys and then confirmed by pressing the
FLOW
sensor
status
Timer F F F 7.0 ml
Liv Stop P 0%
Pump status
•
Dry = pump starting up
•
Stop = pump stopping
•
Restart = pump restarting
-­‐
+
-­‐
-­‐
+
-­‐
-­‐
+
-­‐
www.haywardflowcontrol.com
key. In "before" mode, the relay closes before the
Programmed value
•
Quantity in ml
•
Value of dosing in
progress:
Q.tà
•
Percentage of
strokes/min max
Valore della percentuale di
dosaggio, modificabile premendo
sui tasti + o -
This makes it possible to set the maximum flow offered by
the pump, and the programmed mode (% or frequency) is
used as the standard unit of measurement when displaying
the flow. Changes can be made by pressing the
then using the
to confirm and return to the main menu
This is used to set the alarm relay in the absence of an
alarm situation, if open (default) or closed.
Changes can be made by pressing the
the keys to set the new value. Press
confirm and return to the main menu
key.
Display at start-up (MODE key)
Modalità di funzionamento
Vengono visualizzati in
sequenza:quantità da
dosare, ritardo in g.hh.mm e
intervallo in g.hh.mm
•
20,0ml
20,0ml P 100%
Operation
keys to set the new value. Press
Operation
1-888-INDL (1-888-429-4635)
Valore del dosaggio
Quantità
programmata in
ml
key,
key, then using
to
ZKDIOM
Pg. 7 of 10