Intended Use; Safety Features - Husky H38CPRAT Guía De Uso Y Cuidado

INTENDED USE

□ This tool is intended for the fastening and loosening of bolts, nuts and various threaded fasteners within the
respective range of dimensions. This cordless ratchet has a square anvil that accepts only standard 3/8" (10 mm)
sockets.
□ DO NOT use under wet conditions or in presence of flammable liquids or gases. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced operators use this tool.
□ Avoid the possibility of accidental starting, always make sure that the lock button is slid to the locked position
before making any adjustments or removing/installing accessories.
WARNING: Before attempting to use this cordless tool, become familiar with all of its operating
features and safety requirements.
NOTE: This tool is not fully charged on leaving the factory. Charge the tool before first use.

SAFETY FEATURES

The tool has safety features that will prevent low-voltage, over temperature, and over current damage to the tool or
battery. The following conditions may cause temporary shutdown of the tool as a safety feature to the user, as well
as to prolong the life of the tool and battery.
□ Low-voltage protection: indicated by one remaining power LED and worklight flashing. This means the voltage has
reached the lowest limit allowed by the manufacturer and the tool will stop operation to prolong battery life. The
battery voltage may recover after a small rest period. To do more work, the tool will need charging.
□ Over temperature protection: indicated by three remaining power LEDs flashing. When the tool is used under
heavy load continuously, the maximum allowable temperature of the battery may be reached, and the tool will
temporary stop working and will not restart until it has cooled to a safe level.
□ Over current protection: indicated by three remaining power LEDs flashing at high speed. When the tool is used in
an extra-heavy duty application, the current limit may be reached, causing shutdown of the tool power. Tool
operation can be resumed immediately after releasing the switch.
8