Exchange Of Fuses; General Advice - Dreve Drufosmart scan Instrucciones De Trabajo

Termoadaptador a presion universal 4 bar
Ocultar thumbs Ver también para Drufosmart scan:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
Drufosmart scan

12. Exchange of fuses

Disconnect the unit from mains supply.
The fuse carrier is situated at the rear of
the unit, integrated in the mains supply.
In order to control or exchange the
fuses push the push catch of the car-
rier, keep it pressed and remove the
carrier from the unit.
Pull the defective fuse out of the clamp
carrier applying slight traction and
replace it by a new, equivalent one.
Important: Only use the fuse
strength indicated on the rear.
42
After exchanging the fuse insert the
fuse carrier into the housing applying
slight pressure until the fixation latches
noticeably.

13. General advice

Repairs on the Drufosmart scan units
· the unit is operated in accordance with
may only be executed by experts. Dis-
these working instructions.
connect the unit from mains supply at
· extensions, new adjustments, changes
any rate. Dreve company is only respon-
or repairs are executed by persons
sible for the safety, reliability and per-
authorised by the company.
formance of the unit, if:
As we are currently developing our
· the unit is exclusively used for the cor-
products, we reserve the right for tech-
responding field of application.
nical changes.
· operation is only carried out by accord-
ingly trained personnel.
14. Guarantee
Liability
The guarantee time amounts to two
years after the date of delivery. Guaran-
The right of the purchaser to bring
tee is only accepted in case of material
actions arising out of defects shall in
or fabrication defects. The guarantee
all cases be in lapse one year after the
obligation does not refer to natural
date of delivery. The warranty obliga-
wear and tear or to damage occurring
tion does not refer to natural wear
after the transfer of risk due to improper
and tear or to damage occurring after
or unsuitable handling, excessive stres-
the transfer of risk due to improper or
sing, unsuitable operating material, and
unsuitable handling, excessive stres-
chemical, electrochemical or electrical
sing, unsuitable operating material, and
influences of a nature not provided for
chemical, electrochemical or electrical
according to the contract. On improper
influences of a nature not provided for
alterations, repairs or maintenance or
according to the contract. On improper
breach of seals carried out by the pur-
alterations, repairs or maintenance or
chaser or third parties our warranty obli-
breach of seals carried out by the pur-
gations and liability for consequences
chaser or third parties our warranty obli-
caused thereby are rendered void.
gations and liability for consequences
caused thereby are rendered void.
43

Publicidad

Tabla de contenido
loading

Tabla de contenido