Settings; Connecting Your Extel Connect Videophone To Your Smartphone; Activating The Hotspot On Your Video Doorkeeper - Extel 720308 Instalación Y Guía Del Usuario

Note that gate opening functions are only valid if the screen is displaying the exterior
video feed.
• To activate the surveillance function, press the key.
e. Settings
• General:
• Setting the clock: To access the clock settings, go to the main menu and enter the sub-menu
.
The clock will be visible on the standby screen and photos created by the videophone will be named according to
the date and time taken.
• Photo:
You can view your photos from the Photo menu .
- View them by going back into the Photo menu.
- To navigate from one photo to another, use the and keys.
You can select a photo by clicking the key. You can then erase it by clicking OK.
Notifications: When a visitor rings the doorbell and alarms are activated on the application, the telephone con-
nected receives a notification on iOS or a call on Android. After the visitor has rung, a notification transmission time
can be set in the Wifi sub-menu, by modifying the time shown opposite the icon .
7. CONNECTING YOUR EXTEL CONNECT VIDEOPHONE
TO YOUR SMARTPHONE
Warning Extel Connect is not compatible with 5Ghz Wifi; check that your ADSL Box is 2.4GHz
a. Activating the Hotspot on your video doorkeeper
When your doorkeeper is first connected to your Extel Connect video, you need to pair it with your smart-
phone.
To pair it, you need to trigger 'Hotspot' mode on your monitor. This way, it will emit a Wifi signal that is needed
during this initial installation
1 2 3
cg05167913
NO
4
5
cg05167913
OK
20 secs
HOTSPOT CONFIG.
CFI EXTEL CONNECT - V1
EN6