User Guide
1. Conformity of Use
For carefree and safe use of this product, please read this manual and safety information
carefully and follow the instructions. The unit is registered as a device that does not cause
or suffer from radio-frequency interference. It is CE approved and it conforms with the
Low Voltage Directory. The safety and installation instructions must be observed.
Technical manipulation of the product or any changes to the product are forbidden, due
to security and approval issues. Please take care to set up the device correctly - consult
your user guide. Young children should use the device only under adult supervision. No
guarantee or liability will be accepted for any damage caused due to incorrect use of
the equipment supplied, other than indicated in this owner's manual.
SAFETY WARNINGS
x To prevent short circuits, this product (except if specified for outdoor usage) should
only be used inside and only in dry spaces. Do not expose the components to rain or
humidity.
x Avoid strong mechanical tear and wear, extreme ambient temperatures, strong
vibrations and atmospheric humidity.
x Do not disassemble any part of the product: no user-serviceable parts are inside. The
product should only be repaired or serviced by qualified and authorized service
personnel. Defected pieces must be replaced by original (spare) parts.
x Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of time.
When inserting batteries be sure the polarity is respected. Make sure that the batteries
are not short circuited and are not disposed in fire (danger of explosion).
In case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees expire. The supplier does not accept responsibility in the case of
improper usage of the product or when the product is used for purposes other than
specified. The supplier does not accept responsibility for additional damage other than
covered by the legal product responsibility.
2. Introduction
Thank you for purchasing the ebode FM Sound. Listen to your music player on your (car)
radio.
3. Charging
The FM transmitter will be charged via the USB charger. A charging indicator will flash on
the upper left of the LCD screen. Once full, the symbol will dim and hide itself.
4. How it works
1. Turn your FM transmitter on by simply pressing the '+' button once.
2. Plug the FM Sound in your device's 3.5mm port.
3. The LCD screen will show the frequency
4. Adjust the frequency to a suitable number which is not occupied by any local FM
8-1-2013
3
ebode FM-SP