Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7. x
Operation
x
OPERATION
After the electrical and mechanical installations have been performed, the pump is ready for operation. No
operational procedures are required except to apply rated power to the pump. There are no specific shutdown
procedures beyond disconnecting the power supply.
IF THE ROTATION OF A SINGLE PHASE PUMP IS INCORRECT, NOTIFY THE LIBERTY PRODUCT
SERVICE DEPARTMENT IMMEDIATELY. DO NOT SWITCH THE POWER SUPPLY LEADS. DO NOT
OPERATE THE PUMP.
ALWAYS ENSURE THAT THE PUMP IS FREE OF WIRES OR OTHER OBSTRUCTIONS THAT MAY CAUSE
HARM OR INJURY.
PERIODIC MAINTENANCE & LUBRICATION
Liberty pumps are designed for long lasting, efficient and reliable service with a minimum of preventive
maintenance checks. These checks are few but will add years of satisfactory service to the life of the pump
LUBRICATION
Pump is permanently lubricated and cooled by turbine oil. If replacement oil is required, use ISO-10 turbine oil.
Capacity .5 gallons.
©Copyright 2015 Liberty Pumps Inc. All rights reserved
- 9 -
Publicidad
Tabla de contenido
