Listening To Cd - Fujitsu Ten ECLIPSE CD3100 Manual Del Propietário

Operation

Listening to CD

Press the
1
button.
The front panel opens.
If a disc has already been loaded, the
disc is ejected by pressing the [
(OPEN/EJECT)] button.
Insert a CD into the disc slot, label
2
side up.
The front panel automatically closes
and the CD will immediately start
playing.
ATTENTION
• Playback may be intermittent when there is
a scratch on a CD or when the recorded
side is dirty.
• When a CD is already loaded, press the
[SOURCE] button for less than one second
to switch to the CD mode. (For details, refer
to "Switching Audio Modes" on page 15.)
CAUTION
Do not press the
button while CD is being inserted. This
could cause an injury and damage to the
front panel.
24
[ (OPEN/EJECT)]
(OPEN/EJECT)
[
● Note ●
• When music data recorded in
the normal way (CD-DA) is
present on the same disc with
MP3/WMA
normally recorded music data
will be played. To listen to the
MP3/WMA music files, press
[MODE] button for more than
one second.
• When a non-MP3/WMA file is
played, "NO SUPPORT" will
appear.
• The optional
cannot be used to play MP3/
WMA files.
]
music files, the
CD changer