Adjusting The Picture Elements - Plus U3-1080 Manual Del Usuario

A d j u s t i n g
The picture elements such as brightness, contrast, white
balance, and so on can be adjusted individually for each
input source. The adjustable items vary depending on the
input source.
(The elements marked with " " are adjustable.)
Input source VIDEO/S-VIDEO
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
1
Select the input source (see page 16)
2
Press the MENU button to display the
menu, hold down the cursor
the MENU button and then select "IM-
AGE".
3
Press the cursor
"BRIGHTNESS".
The items that appear in the menu will differ
depending on the input.
4
Press the cursor
brightness.
5
Press the cursor
"CONTRAST".
6
Press the cursor
contrast.
t h e p i c t u r e
CONPONENT VIDEO RGB
–
–
–
/ keys or
/ keys to select
/ keys to adjust the
/ keys to select
/ keys to adjust the
E – 22
http://www.pureglare.com.au
e l e m e n t s
For VIDEO, S-VIDEO and component video
(YCbCr) input.
7
Press the cursor
"COLOR".
8
Press the cursor
color.
9
Press the cursor
"TINT".
Note
This adjustment is not possible with the SECAM color system.
10
Press the cursor
tint.
11
Press the cursor
"SHARPNESS".
12
Press the cursor
sharpness.
/ keys to select
/ keys to adjust the
/ keys to select
/ keys to adjust the
/ keys to select
/ keys to adjust the
To close the menu
Press the CANCEL button.