Initial Settings - Plus U3-1080 Manual Del Usuario

S e t t i n g i n A c c o r d a n c e W i t h
I m a g e C o n t e n t s
Setting Keystone
This is used to set the height for keystone adjustment.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor / keys to select "VIEW".
2
Display the frame, then use the cursor
keys to select "KEYSTONE".
3
Use the cursor
MAL" or "FULL".
Normal: normal keystone correction
Full: In this mode, the image is enlarged to fill
the screen vertically and then Keystone correc-
tion is performed.
Setting the partial display position
Input a signal that is rated SXGA (XGA for the U3-880) to
RGB/YCbCr connector and then set the partial display
position with ASPECT (described later) set to Real.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor / keys to select "VIEW".
2
Display the frame, use the cursor
keys to select "PAN" and then press the
ENTER button.
3
Use the cursor
display position.
( c o n t i n u e d )
/ keys to select "NOR-
/
/ , / keys to set the
http://www.pureglare.com.au
I n i t i a l
Audio Muting
Audio only can be muted for each input.
This function is convenient when multiple video units are
connected to this projector.
1
Select the input to be muted (page 16).
2
With the FLIP COVER of the remote con-
/
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor /
3
Use the cursor
"SOUND MUTE", then use the cursor
keys to set muting to ON or OFF.
Selecting the Background
Two different backgrounds can be selected for projection
when there is no signal input.
1
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor /
2
Use the cursor
"BACKGROUND".
3
Use the cursor
the following backgrounds.
Blue Black
Auto Gain
Brightness and contrast are adjusted automatically.
1
Select the input to be set for auto gain
(page 16).
2
With the FLIP COVER of the remote con-
trol open, press the MENU button to dis-
play the Advanced menu, then use the
cursor /
3
Use the cursor
GAIN", then use the cursor
set ON or OFF.
E – 28
S e t t i n g s
keys to select "SETUP".
/ keys to select
keys to select "SETUP".
/ keys to select
/ keys to select one of
keys to select "SETUP".
/ key to select "AUTO
/ keys to
To close the menu
Press the CANCEL button.
/