Brother QL-710W Guía De Configuración Rápida página 29

It is recommended that you use a
computer wirelessly connected to your
network for this method.
•
You need to temporarily use a USB
cable during configuration.
•
If you are using Windows
using a network cable to connect
your computer with your wireless
access point/router, you need to
know the SSID and Network Key of
your WLAN access point/router
before you proceed. Please write
down your wireless network
settings in the area below.
•
Please do not contact Brother
Customer Service for assistance
without the wireless security
information. We cannot assist you
in locating your network security
settings.
MEMO
Item
SSID
(Network Name)
Network Key
(Security Key/
Encryption Key)
*
The Network Key may also be
described as the Password, Security
Key or Encryption Key.
• If you do not know this information
(SSID and Network Key), you
cannot continue the wireless setup.
• How can I find this information
(SSID and Network Key)?
1 Refer to the documentation
provided with your WLAN
access point/router.
2 The initial network name
could be the manufacturer's
name or the model name.
3 If you do not know the
security information, please
consult the router
manufacturer, your system
administrator, or internet
provider.
®
XP or
Setting
Method2
One push configuration using WPS
and configuration using the Installer
CD-ROM
If your WLAN access point/router
supports automatic wireless (one-push)
setup (WPS), you can also choose this
method.
21