Operating Mode; Decimal Point; End Of Programming; Technical Data - Eaton E5424E0402 Manual Del Usuario

3.4 Operating mode

*0, 0.1, 0.01, 0.001 means: time measurement in
0, 0.1, 0.01, 0.001 time units

3.5 Decimal point

3.6 SET/RESET mode
MN05401011E
Time unit: seconds (reso-
lution depending on posi-
tion of the decimal point*)
Time unit: minutes (reso-
lution depending on posi-
tion of the decimal point*)
Time unit: hours (resolu-
tion depending on posi-
tion of the decimal point*)
Time units:
Hours:Minutes:Seconds
(decimal point setting is
ignored)
The decimal point defines
the resolution of the pro -
gram med time unit.
0 1
0.0 1/10 (0.1)
0.00 1/100 (0.01)
0.000 1/1000 (0.001)
manual reset via the red
SET/RESET key and
electrical reset via the
SET/RESET input
no reset (red
SET/RESET key and
SET/RESET input
locked)
only electrical reset via
the SET/RESET input
only manual reset via the
red SET/RESET key
3.7 SET value

3.8 End of programming

4. Technical data

Supply voltage
DC power supply:
Display:
Data retention:
Polarity of the inputs:
Input resistance:
The device will be set to
the set point by pressing
the red SET/RESET key
or activating the
SET/RESET input.
SET value 0 – 999 999
or 99.59.59 (number of
decimal places depends
on the decimal point
option)
The programming routine
is repeated once more.
The values set until now
can be checked and mod-
ified.
The programming routine
will be exited and all
values set will be stored
as new parameters.
Afterwards the device is
ready for operation.
10 – 30V DC/max. 40 mA
with inverse-polarity protection
6 digits, red 7 segment
LED display, height 8 mm
[0.31 in]
EEPROM
Programmable, npn or pnp
(sinking or sourcing) for all
inputs
appr. 5 kOhm
7