Greenlee SITE-RITE 840A Manual De Instrucciones página 2

Description
The Greenlee aluminum SITE-RITE
manually powered tools intended to bend 1/2" through 1-1/4" EMT
(electrical metallic tubing) and 1/2" through 1" rigid and IMC conduit.
Purpose
This instruction manual is intended to familiarize operators and
maintenance personnel with the safe operation of the Greenlee
SITE-RITE Manual Benders. This manual should be kept available to all
®
operating personnel.
Inspect the tool for wear or damage. Replace worn, damaged,
or missing components with Greenlee replacement parts.
A worn, damaged, or improperly assembled component may fail,
resulting in injury or property damage.
Use this tool for manufacturer's intended use only. Use other than
that for which the tool was intended may result in injury.
All specifications are nominal and may change as design improvements
occur. Greenlee Textron Inc. shall not be liable for damages resulting
from misapplication or misuse of its products.
Additional copies of this manual are available

A person who has not read and does not
understand all operating instructions is not
qualified to operate this tool.
Failure to read and understand safety instructions
may result in injury or property damage.
KEEP THIS MANUAL
upon request at no charge.
SITE-RITE
and iron SITE-RITE
®
Greenlee / A Textron Company
Hand Benders
®
benders are
®