Selection Of The Operating Mode; Ventilation Mode - FGE Farelek 112501 Manual De Instrucciones

6

Selection of the operating mode

1 Auto mode
Once the unit has been activated, the operating mode will change to cooling,
dehumidification or heating depending on the ambient temperature. If the air
conditioner is stopped for two hours, it will start again in the mode specified
before stopping. Once the operating mode has been defined, it will not be
influenced by any change in the ambient temperature. Press the manual Scan
key and the automatic Scan key to modify the ascending/descending direction
of the air flow.
2 Cooling mode
Press the manual SWING key and the automatic SWING key to modify the
ascending/descending direction of the air flow. Press the FAN SPEED key to
modify the fan speed of the internal unit. Press the TEMPERATURE SET key to
modify the programmed temperature.
3 Deshumidification mode
Press the manual SWING key and the automatic SWING key to modify the
ascending/descending direction of the air flow. Press the FAN SPEED key to
modify the fan speed of the internal unit.

4 Ventilation mode

Press the manual SWING key and the automatic SWING key to modify the
ascending/descending direction of the air flow. Press the FAN SPEED key to
modify the fan speed of the internal unit.
5 Heating mode
Press the manual SWING key and the automatic SWING key to modify the
ascending/descending direction of the air flow. Press the FAN SPEED key to
modify the fan speed of the internal unit. Press the TEMPERATURE SET key to
modify the programmed temperature.
6 Use of the modes
To avoid passing successively from the cooling mode to heating, under penal-
ty of damaged the apparatus
112501-505-506-507-H.indd 55
© FAR GROUP EUROPE
EN
10/02/06 8:11:59