Service And Maintenance; Before Startup - FGE Farelek 112501 Manual De Instrucciones

SERVICE AND MAINTENANCE

In the case of prolonged non-utilisation
1
Operate the fan on its own for 3-4 hours in order to
dry completely the components of the internal unit.
•
Select the «COOL» or «HEAT» mode, and then the
highest programmed temperatures and start the fan.
2
Stop the air conditioner, and unplug it (important
when not used for a long time because accumulated
dust can cause a fire)
3
Remove the batteries from the remote control
112501-505-506-507-H.indd 57

Before startup

1
Clean the filters and replace them in their housing.
Clean the internal unit using a soft cloth
•
Do not use petrol, benzene, diluent, abrasive
powder, detergent, insecticide etc. to clean the unit
because you could damage it.
2
Do not cover or obstruct the inputs and outputs of
the internal and external units.
3
The earthed cable must be securely fixed. Insert the
batteries and plug in.
© FAR GROUP EUROPE
EN
10/02/06 8:12:00