All manuals and user guides at all-guides.com
PC D
I S P L AY
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Press the PC button under the remote's cover to select the PC mode.
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select "Setup",
then press the ENTER
button.
Press the UP/DOWN
buttons to select "PC" then
press the ENTER
button.
2
Press the ENTER
button
to select "Image Lock".
3
Press the UP/DOWN
buttons to select "Coarse"
or "Fine", then press the
ENTER
button.
Press the LEFT/RIGHT
buttons to adjust the screen
quality. Vertical stripes may
appear or the picture may
be blurry.
Press the EXIT button to exit.
<Adjusting Coarse>
<Adjusting Fine>
53
English-