ELECTRIC OPTION ROUGH-IN
There are two types of electrical options available for vanities. The first is a night light option ordered with the vanity and requires
electrical outlets. The second is an electrical outlet option. Both of these options can be plugged into the same outlet.
The outlet must be wired to a 120vac 20 amp GFCI circuit. We do not recommend using a GFCI outlet because resetting it under the
vanity will be inconvenient.
The night light has no switch. It is recommended that you switch the outlet to operate the night light. Locate the switch near the doorway
to the bathroom.
All applicable electrical codes in your area must be followed.
Outlet can be installed to the left or right of center depending on which side the optional Electrical Outlet Drawer will be located.
3-3/4"
(95 mm)
12"
(305 mm)
5-1/8"
(130 mm)
© 2016 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
24"=18-1/2"
(470 mm)
30"=24-1/2"
(622 mm)
36"=30-1/2"
(775 mm)
Drain Area
12" = center line
24" = 2-1/2"
(64 mm)
30" = 5-1/2"
(140 mm)
36" = 8-1/2"
(216 mm)
7-1/2"
(191 mm)
7
C L
Part no. 209-1232-E-Cartesian, Profiles H2 rev. 05/16/18
Cartesian™ Vanity, Profiles™ Vanity