Publicidad
FRAME INSTALLATION
4. Level the frame and tighten to the wall as shown on page 8 and here in Fig. 4. The left keyhole is elongated to allow for up and down
adjustment.
5. Install the four Structural Screws (203-1256) into the four top frame holes. Figure 5. A T-30 Torx Bit is provided. If the wall is bowed,
shim where required.
6. If required, shim the bottom at the frame/side intersection (Fig. 6).
7. Install two #10 x 2" (SS674) through the narrow slot of the keyhole on the flange (Fig. 7).
4
6
© 2016 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
5
7
9
(4) 5/16" x 2-1/2"
5/16" x 2 1/2"
Structural Bolt
4-Structural Bolt
4-Perno estructural
SS674
#10 - 2"
Part no. 209-1232-E-Cartesian, Profiles H2 rev. 05/16/18
Cartesian™ Vanity, Profiles™ Vanity
[203-1256]
[203-1256]
4-Boulon
Publicidad
Capítulos
