Craftsman 919.762500 Manual Del Operador página 8

Know Your High Pressure Washer
Read this Owner's Manual and Safety Rules before
operation of your High Pressure Washer Compare
this illustration with our pressure washer to familiarize
yourself with the location of various controls and
adjustments. Save this manual for future reference.
PUMP- Develops high pressure.
ENGINE OIL FILL- Place where engine oil is poured.
PRESSURE REGULATOR- Allows you to adjust the
pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine in starting
mode for recoil starter -- Stops running engine.
RECOIL STARTER- Used for starting the engine
manually.
SPRAY GUN ASSEMBLY- Controls the application of
water onto cleaning surface with trigger device.
PUMP OIL FILL- Port where pump oit is poured and
breather cap is located.
GAS TANK/CAP- Cap is removed and unleaded
gasoline is poured.
CHEMICAL INJECTION TUBE AND FILTER- Mixes
water and detergent in outlet water flow.
HIGH PRESSURE OUTLET- Connection for high pres-
sure hose.
CHOKE- Lever used for starting unit.
HiGH PRESSURE HOSE
,\
GAS
PRESSURE
REGULATOR
GUN WAND
)./_IASSEMBLY
HANDLE
ON/OFF
SWITCH
BREATHER
CAP
PUMP OIL
PORT
ENGINE O_L
FILL
MUFFLER
CHEMICAL
ADJUSTMENT
KNOB
PUMP
CHEMICAL _NJECTOR WATER INLET
TUBE & F_LTER CONNECTION
HiGH PRESSURE OUTLET