XO S30S Manual De Utilización página 22

Fig.2: Remove the bracket H by loosening the
screws E and throw it away.
�
1/4" METAL
DUCT PIPE
NOT
INCLUDED
Fig.4: Once the diverter has been fas-
tened to the wall, connect the flexible
pipe (1/4" METAL DUCT PIPE NOT IN-
CLUDED) to the diverter and fitting
flange.
�
�
�
Fig.3: Center the air diverter A in
the middle of the hood and posi-
tion it as high as needed. Follow the
indicated quotas to drill the holes
and fasten the diverter using the
screws and expansion plugs b1.
�
�
Fig.5: Place the bottom flue G on top of
the frame. Then pull out the top flue F un-
til it meets previously installed diverter.
Screw it all together using the 2 screws E.
- 22 -
��
���
��
� �
��
�