Recording - Samsung 7 Serie Manual De Instrucciones

Anynet + Menu
The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV.
Anynet + Menu
View TV
Device List
(Device_Name) Menu
(Device_Name) Operation
Record: (*recorder)
(*recorder) Reserve Recording
Stop Recording: (*recorder)
Receiver
➢
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet + Mode
Device Type
Anynet + Device
Device with built-in Tuner
Audio Device
The Anynet + function only works when the active source on the TV remote control is set to TV.
➢
➢
The button works only while in the recordable state.
You cannot control Anynet + devices using the buttons on the TV. You can control Anynet + devices only using the TV
➢
remote control.
The TV remote control may not work under certain conditions. In this case, reselect the Anynet + device.
➢
The Anynet + functions do not operate with other manufacturers' products.
➢
➢
The , operations may differ depending on the device.

Recording

You can make a recording of a TV program using a Samsung recorder.
1 Press the TOOLS button.
Press the ENTER button to select Anynet+ (HDMI-CEC).
 Press the ▲ or ▼ button to select Recording: (device_name), then press the
ENTER button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTER button.
Recording begins.
When the recording device is not displayed
Select Device List and press the red button to search devices.
Press the EXIT button to exit.
➢
You can record the source streams by selecting Recording: (device_name).
➢
Pressing the button will record whatever you are currently watching. If you are watching video from another
device, the video from the device is recorded.
➢
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect
an antenna to a recording device, refer to the recording device's users manual.
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus.
E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
Shows the play menu of the connected device.
E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Enables reserving a recording for the recorder. (This is only available for devices that support the
recording reservation function.)
Stops recording.
Sound is output through the receiver.
Operating Status
After switching to the device, when the menu
of the corresponding device is displayed on the
screen.
After switching to the device, while playing a file
After switching to the device, when you are
watching a TV program
When a Receiver is activated
English - 1
Description
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER
Color buttons / EXIT button
(Backward search) /
(Stop) / (Play) /
CH / CH button
VOL – / VOL + / MUTE button
View TV
Device List
Recording : DVDR
DVDR Operation
Receiver
Setup
buttons
(Forward search)
(Pause)
: On
Move Enter Return