TV Remote Control Buttons Available in Anynet+ Mode
❑
Device Type
Operating Status
After switching to the device, when the
menu of the corresponding device is
displayed on the screen.
Anynet
Device
+
After switching to the device, while
playing a file
Device with built-in
After switching to the device, when you
Tuner
are watching a TV programme
Audio Device
When Receiver is activated
The Anynet
function only works when the active source on the TV remote control is set to TV.
N
+
The
button works only while in the recordable state.
N
You cannot control Anynet+ devices using the buttons on the TV. You can control
N
The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
N
The
Anynet
functions do not operate with other manufacturers' products.
+
N
The
,
operations may differ depending on the device.
N
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it
N
will be represented as (*device_name).
Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Press the TOOLS button. Press the ENTER E button to select Anynet
2. Press the ▲ or ▼ button to select Record(recorder): then press the ENTER E button.
Recording begins.
When there is more than one recording device
N
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTER E
button. Recording begins.
When the recording device is not displayed
N
Select Device List and press the red button to search devices.
Pressing the
button will record whatever you are currently watching. If you are watching video from another device, the video
N
from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna to
N
a recording device, refer to the recording device's users manual.
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER E buttons
Colour buttons / EXIT button
(Backward search) /
(Play) /
(Pause)
P
/
button
/
button
=
M MUTE button
Anynet
+
(HDMI-CEC).
English - 37
(Forward search)
(Stop) /
devices only using the TV remote control.
+
View TV
Device List
Record
: DVDR
DVDR MENU
DVDR INFO
Receiver
: On
Setup
Move
Adjust
U
L
Return
R