GALAGAR GALA CUT 350 K G.E. Manual Técnico De Instrucciones página 12

1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The cutting function of the GALA CUT 350 K machines is carried out by electric plasma blown with compressed
air. They can cut all kinds of electricity conductor material: Steel, stainless steel, aluminium, brass, etc. Plasma
with built compressor. Using professional. Inverter high portability.
Technical characteristics
POWER INPUT
TORCH
COMPRESSOR
CUT OUPUT
FUNCTIONS
IP mechanical protection degree
Dimensions WIDTH x HEIGHT x LENGTH (mm)
Weight (Kg.).
According norms;
260
GALA CUT 350 K G.E.
Technical characteristics GALA CUT 350 K G.E.
Supply voltage (U - 1Ph. 50/60 Hz)
1
Maximum primary intensity (I
Effective primary intensity (I
Protection against connection at 400V
Suitable for generating set.
Torch (Included in the machine)
Type of gas input
Ignition system
Pilot arc intensity
Work Flow
Electrical data
Noise level
Semiautomatic System Filter and unloading.
Maximum thickness steel cutting (separation).
Cutting current adjustment margin I
Maximum cutting intensity
Rated cutting intensity (ED=100%)
Re-ignition mode. (Cutting framework).
Air-bleed.
Overheating protection.
Secondary voltage indication
Thermal Protection compressor
Protection against fault in electrode.
Torch nozzle-support protection.
EN60974-1, , EN60974-7 y , EN60974-10
NEVER USE THESE WELDING MACHINES TO DEFROST PIPES.
447
540
GALA CUT 350 K
Ref. 509.00.000
230 V ± 10%
)
1max
)
1eff
PT-40 (4 m)
Compressed air
Back striking
(Without HF)
82 l/mín (3 bar)
230 V/50 Hz/620 W
12 mm (15 mm)
16 ÷ 35 A(130V)
2
35 A / 94 V (35%)
260x 500x 447
ONLY USE RECOMMENDED SPARE
PARTS AND ACCESSORIES.
GALA GAR has a complete range of welding
accessories, where you will find everything you
29 A
17 A
SI
SI
16 A
68 dB
YES
21 A (100%)
YES
YES
YES
YES
YES
YES
YES
IP 21
25Kg
need.
Pág. 12