Tabla De Contenido; Personal Safety - Everbilt SUP80-HD Guía De Uso Y Cuidado

Table of Contents
Table of Contents ..................................2
Safety Information .................................2
One Year Limited Warranty ..................3
Pre-Installation ......................................4
Intended Use .............................................. 4
Maintenance Free Motor ............................ 4
Unpacking and INspection ......................... 4
Safety Information
READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble,
install, operate or maintain the product described.
Protect yourself and others by observing all safety
information. Failure to comply with instructions
could result in personal injury and/or property
damage! Retain these instructions for future
reference.
WARNING: Before turning on the pump, secure
the discharge line. If it is not secured, the discharge
line could flail erratically, potentially causing injury to
you or others and/or property damage.
WARNING: To reduce the risk of electric shock,
unplug the unit before servicing. This pump has not
been approved for use in swimming pool areas. The
pump is equipped with a grounding conductor and
grounding-type attachment plug. Make sure it is
connected only to a properly grounded grounding-
type receptacle. If a 2-prong wall receptacle is
present, it must be replaced with a properly
grounded 3-prong receptacle installed in accordance
with all codes and ordinances that apply.
WARNING: This equipment is for use on 115 V
(single phase) only and is supplied with an approved
3-prong plug and grounding cord.
WARNING: Follow all required electrical and
safety codes when wiring an electrically-driven
pump.
WARNING: Ensure the power source is
compatible with the requirements of your
equipment.
WARNING: A qualified electrician should do all
wiring.
WARNING: Avoid kinking the power cord. If any
cords are worn, repair or replace them immediately.
WARNING: Protect the power cord from sharp
objects, chemicals, hot surfaces, and oil.
Specifications ............................................ 4
Performance Data ...................................... 4
Package Contents ...................................... 5
Installation ............................................. 6
Operation ............................................... 7
Care and Cleaning ................................ 8
Troubleshooting .................................... 8

PERSONAL SAFETY

□
Always wear safety glasses when working on
pumps.
□
Make the work area and shop child safe. Utilize
master switches and locks, and remove all
keys.
□
Keep the work area well-lighted.
□
Keep others at a safe distance away while
working.
□
Keep the work area clean and tidy, and put all
unused tools and equipment away.
□
Never touch or handle the pump, while plugged
in, with wet hands or when standing in water or
on a damp surface.
AUTOMATIC THERMAL PROTECTION
The motor is supplied with an automatic reset
thermal protector. If the temperature in the motor
should rise too quickly, the switch will automatically
shut off all power before the motor can be damaged.
When the motor has cooled sufficiently, the switch
will automatically reset the unit and restart the
motor.
2
WARNING: Risk of electric shock, personal injury,
or death. If your basement has water or moisture on
the floor, do not walk on any wet area until all power
has been turned OFF. If the main power box is in the
basement, call the electric company or hydroelectric
authority to shut-off service to house, or call your
local Fire department for assistance or instructions.
Remove the pump and repair or replace. If you fail to
follow this warning, a fatal electrical shock can
result. Oil on the pump or in the sump may indicate
motor leakage and present an electrical shock
hazard. Turn OFF the power and check the pump for
any oil leakage from the impeller area. If it is leaking,
replace the pump.
IMPORTANT: During use, water must flow
through the pump to prevent the motor from
overheating. The motor is cooled by the water
as it flows through the housing.