Specifications - Ridgid Kollmann SeeSnake KD-200 Manual Del Operador

Kollmann
Frame – A sturdy, powder coated metal structure that the
reel is mounted to. The frame has a second set of feet on
the back side of the reel, allowing the system to rest on
its back (open-end-up) for greater stability.
The guide hoop on the frame helps the push cable
feed in and out of the drum properly, and the brake
knob lets you adjust the amount of drag on the cable for
maximum control. (Figure 7)
The CountIR measures the distance the cable has trav-
eled inside the pipe and can also display the day, date,
time, and up to 33 pages of user defined text information.
The SeeSnake System Cable stores on the frame and
provides the connection between the reel and the cam-
era control unit. (Figure 8)
Figure 9 – Camera Control Unit (CCU) - Consult Your
Camera Control Unit Manual for Operating
Instructions.
3) Camera Control Unit (CCU)
This unit provides power to the camera reel and system
accessories. It also provides a control that adjusts the
camera's lighting and activates the In-Line transmitter.
These range from a unit without a built-in monitor (Power
Pack) to sophisticated units with color monitors and
audio and video recording capability. Units may be pow-
ered by any 120 volt AC source (or 230 volts in some
countries - this requires a different camera control unit
than the 120 volt) or 12VDC, and some include recharge-
able batteries. (Figure 9)
Standard and Mini SeeSnake Diagnostic Equipment
Ridge Tool Company
4) Locating System (optional)
This consists of a miniaturized transmitter and a hand-
held receiving unit. The transmitters operate at the
industry-standard of 512Hz, are extremely durable, re-
quire no batteries for operation and do not interfere with
camera's ability to go through turns. Optional receiving
units are available with either an analog readout or a dig-
ital display with push-button depth calculation.
Pointer XL
KD-4550
Figure 10 – Pointer XL and Pointer Hand Held Locators
(Optional Accessory)

Specifications

Line Capacity
B&W Mini SeeSnake: ....1
Color Mini SeeSnake:....1
B&W SeeSnake:............2" to 12" (50 to 300 mm)
Color SeeSnake: ...........2" to 12" (50 to 300 mm)
Max. Cable Length
Mini SeeSnake: .............200' (61 m)
SeeSnake:.....................325' (99 m)
Reel & Frame Weight
Mini SeeSnake: .............24.5 lbs. (11.1 Kg) with 200'
cable
Standard SeeSnake: .....43 lbs. (19.5 Kg) with 325'
cable
Reel & Frame Diameter
Mini SeeSnake: ...............20 x 11 x 23" (51 x 28 x 58 cm)
SeeSnake: .......................32 x 14 x 30" (81 x 36 x 76 cm)
Power Source:...............120V/60 Hz, 230V/50 Hz, or
12VDC, depending on CCU
Camera Type:................EIA/CCIR (B&W) or NTSC/PAL
(color) video format
Pointer
KD-4510
/ " to 8" (32 to 200 mm)
1
4
/ " to 8" (38 to 200 mm)
1
2
7