UFESA PV0500 Manual De Instrucciones página 21

3
The Heater Light (11) will come on.
The light will go off once the required temperature is reached.
4
Set the steam switch (9) in position
5
Place the iron in horizontal position or press the steam burst button (2). Steam
will come out of the holes in the soleplate.
●
The iron is ready for use.
6
Begin first time ironing with an old towel.
The iron will stop steaming once the water tank is empty.
Ironing
Always follow the ironing instructions on the garment's care
label.
FILLING THE IRON WITH WATER
●
Unplug the unit.
1
Set the steam switch (9) in position
2
Carefully open the water tank lid (3).
When opening the water tank lid, make sure you do not pull out
the steam burst button!
3
Using the supplied water cup (12), fill the tank (4) with water below the "max"
level.
.
.
B