SP7007-1 Air Mover ESF 2017.qxp_SP7007 1/9/17 10:02 AM Page 7
storage
When
stacking
Air Mover on its side as shown, with
the
electrical
For convenience purposes for storage,
the circular recessed area around the
intake will nest into the next Air Mover
stacked. The exhaust vents must be
slightly staggered as shown, to ensure
stability.
cAutIoN:
Air mover when stacked on top of
each other.
WARNING: to reduce the risk of
tip-over during storage, do not stack
more than 3-high.
units,
position
the
outlets
facing
down.
Do
not
operate
Rotate Unplugged Unit, Outlet Down
Stack 3 High Only, Outlet Facing Down
on Each Unit and Slightly Staggered
Intake Vent
Outlet
Facing
Down
Outlet
Facing
Down
Outlet
Facing
Down
7