LEXIBOOK Meteoclock Suntime SM1660 + ASM5 Manual De Usuario página 23

Step 4 – Setting the local city and the altitude
• Look up and note the code of the city found closest to your home. Please refer to the list of city
codes found at the end of the user manual.
• Determine and note the altitude of your town or city in meters (for example: Paris, 88 meters).
• Ensure that the weather station is in the Clock 1 mode ( is displayed to the right of the time).
You may also press the
• Press and hold down the
• Press the
• Use the or
important as it will affect the time of the sunrise and the sunset.
• Press the
• The altitude level flashes. Use the
city (in meters). Press the
Step 5 – Radio controlled clock
• Approximately 7 minutes after the batteries have been inserted, the main unit will launch its
search to find the signal of the radio controlled clock. The
while the search is underway. When the signal is received, the icon
remain still.
• Ensure that the main unit displays the exact time and date. If this is not so, launch the signal
search once more by holding the
Reminder: the SM1660 will only receive the signal if you live in Europe (within the France and
England time zones).
• Ensure that the main unit displays the outdoor temperatures and rate of humidity transmitted by
the sensor. Your new weather station is now ready for use.
key several times until CLOCK 1 appears on the display screen.
key for 3 seconds. The time will begin to flash.
key 3 times. The city code will flash above the « CITY » indicator.
keys to scroll through the city codes on the screen. This setting is
key to confirm the city code.
key to validate all these settings.
or keys to set the altitude of your town or
icon will flash for a few minutes
key down for 3 seconds.
will stop flashing and will