Service And Installer Final Check List; Data Rating Label And Wiring Diagram Locations; Before Calling Service; Installer Final Checklist - Thermador PROFESSIONAL PSO301M Manual De Instalación

Service and Installer Final Check List

Service
Data Rating Label and Wiring Diagram
Locations
The data rating label contains the model and serial
numbers. It can be found at the bottom on the right-hand
side of the appliance.
The electric wire diagrams and schematics are attached at
the back of the appliance, and should not be removed
except by a service technician, then replaced after use.

Before Calling Service

If the steam oven elements or indicator light do not turn on,
check the power source to see if the circuit breaker is
tripped.
See Use and Care Guide for troubleshooting information.
Refer to the Warranty in the Use and Care Guide.
To reach a service representative, see the contact
information on the back page of the manual. Whether you
write or call, please provide us with the Model Number,
Serial Number and Date of Original Purchase.
English 6

Installer Final Checklist

Receptacle with correct over-current protection is
provided for service cord connection.
Proper ground connection.
Owner is aware of location of the main circuit breaker.
Unit is level.
Door handle is level and centered. Door opens and
closes properly.
Specified clearances maintained to cabinet surfaces.
All packaging material removed.
INSTALLER: Write the model number and serial
number found on the Data Rating Label in the
Leave the
AND CARE GUIDE.
and the
INSTALLATION MANUAL
appliance.
USE
USE AND CARE GUIDE
with the owner of the