Briteq Spectra 3D Laser Manual De Instrucciones página 11

ENGLISH
19 CHANNEL DMX-CONFIGURATION (ILDA IS NOT CONNECTED):
IMPORTANT REMARK: DMX Channel1 is used to set the different working modes of the laser.
 To use the laser in full 19 channel mode, channel 1 must be set to value 235 or higher.
 Depending on the DMX-values of channel1, different mode can be applied:
CHANNEL
PATTERN
BRITEQ
®
VALUE
000-018
019-036
037-054
055-072
073-090
091-108
109-126
CH 1
MODE
127-144
145-162
163-180
181-198
199-216
217-234
235-255
000-051
052-103
CH 2
104-155
GROUP
156-207
208-255
CH 3
000-255
000-007
008-015
016-023
024-031
032-039
040-047
CH 4
COLOR
048-055
056-063
064-111
112-159
160-127
208-255
FUNCTION
Laser OFF
AUT Auto Show with Mixed 5 effect
A3D Laser 3D Effect Auto Show
AUB Scanned Beam Effect Auto Show
AUL Laser Lumia Effect Auto Show
AUN Burst Grating Effect Auto Show
AUO Laser Universal Effect Auto Show
SOU Sound Show with Mixed 5 Effect
S3D Sound show with LASER 3D
SOB Sound show with Scanned Beam
SOL Sound show with LASER LUMIA
SON Sound show with Burst Grating
SOO Sound show with Laser Universal
DMX MODE
1 Group
Patterns.
2 Group
Patterns
3 Group
Patterns
4 Group
Patterns
5 Group
Patterns
Every 16 for 1 Group, total 16 patterns.
Original
Red
Green
Yellow
Blue
Purple
Light Blue
White
Color Rolling
Color Jumping
Color Moving
Strobing
9/68
USER MANUAL
SPECTRA 3D LASER