General Arrangement - MEDC SM87HXB Manual Tecnico

3.0 OPERATION
The operating voltage of the unit is stated on the certification label. The beacon can be initiated either directly or
remotely depending on the type ordered. Please see the wiring documentation supplied with the unit for further
information.
4.0 MAINTENANCE
During the working life of the unit, it should require little or no maintenance. However, if abnormal or unusual
environmental conditions occur due to plant damage or accident etc., then visual inspection is recommended.
If the unit requires cleaning, then only clean exterior with a damp cloth to avoid electro-static charge build up.
If a unit fault should occur, then the unit can be repaired by MEDC. All parts of the unit are replaceable.
If you acquired a significant quantity of units, then it is recommended that spares are also made available.
Please discuss your requirements with the Technical Sales Engineers at MEDC.
Description
Cover assembly (Without lens guard fitted)
Cover assembly (With lens guard fitted)
O-ring ( lloy units)
O-ring (Stainless Steel units)
Electronics assembly (110Vac / 60fpm)
Electronics assembly (240Vac / 60fpm)
Electronics assembly (24Vdc / 60fpm)
Spare xenon tube
Cover screw for st. steel unit (4 off required)
Cover screw for alloy unit (4 off required)
09/16

GENERAL ARRANGEMENT

Part Number
Contact MEDC
Contact MEDC
PX99900312
PX99900233
PX99900094
PX99900121
PX99900099
PX99900122
PX99900584
PX99900818
© MEDC 2016