sylvac Ul 4 Serie Modo De Empleo página 8

4. Advanced functions (continuation)
MODE
MODE
MODE
MODE MODE
5. Bluetooth
®
The connection procedure has been designed to be simple and is signalled by
the following three states :
1° Symbol off
2° Symbol blinking
3° Symbol on
Connection :
1°Activate Bluetooth ® Smart compatible software and hardware (Master : PC,
Display Unit)
2°Start the instrument. By default the Bluetooth® module is active and the
instrument is available for connection during 120s (advertising mode)
3°As soon as the device is detected, a connection is established automatical-
ly. If no connnection is established during 120s, reactivate the Bluetooth ®
module using the bt / On menu.
4°Instrument is ready to communicate (connected mode)
5.1 Pairing
Pairing with master is automatically done at first connection.
To connect the instrument to a new master (new pairing), it is necessary to
clear all pairing information on the instrument using the bt / rESEt menu.
SET
SET
SET
rEsEt MAC
disconnected mode
advertising mode
connected mode
Introduction of a multiplier, other than 1.000
next digit
Automatic switch-off mode
MAn = de-activated, Auto = active (after 20 min.)
Keypad lock : only the favourite key
(to unlock the keypad, press
SET
Bluetooth ® function
8
0...9 save the multiplier
SET MODE
remains active
for 5 s.)
SET