Programming; Description Of The Buttons; Temperature Button - Carel DLOGNTC015 Manual De Utilización

appears, it means that the instrument has undergone damages of the hardware type (see the ALARM section).

Programming

The instrument allows the display and storage of the temperature measured with, at most, two distinct probes (NTC). The stored
temperature is the instantaneous value detected at selectable time intervals (see mask 3). In addition to the two probe inputs, the
instrument is equipped with two clean digital outputs and one exchange-relay alarm digital output. It is possible to choose whether
to activate only one probe or both.
Each digital input is coupled with only one of the two probes. The keyboard consists of six buttons, four of which are provided with
back-lit LEDs.

Description of the buttons

1
4
Function buttons provides an easy to use format
1 Recorded temperature and general information display button;
2 clock programming button;
3 buzzer silencing and alarm display button;
4/5 stored data scrolling buttons;
6 parameter selection button.

TEMPERATURE Button

TEMPERATURE Mode
With a gentle pressure on the button, the main mask is displayed (also present at the switching on and during the normal
functioning of the instrument).
05/11/1996 12:53
+18.5°C
1 confi gurated probe
FLASH DOCTOR...
2
5
ROOM1
3
6
05/11/1996 12:53
+18.5°C -12.5°C
2 confi gurated probes