Generac OneWASH Manual Del Operador página 10

Safety
2.1.10 m Spark Hazards
_ nintentional sparking can result in
fire or electric shock.
WHEN ADJUSTING OR MAKING
REPAIRS TO YOUR Power washer.
• Disconnect the spark plug wire from the spark plug and
place the wire where it cannot contact spark plug.
WHEN TESTING FOR ENGINE SPARK
• Use approved spark plug tester.
• DO NOT check for spark with spark plug removed.
2.1.11 m Splash Hazards
• Check fuel system for leaks or signs of deterioration,
such as chafed or spongy hose, loose or missing
clamps, or damaged tank or cap. Correct all defects
before operating power washer.
• This equipment is designed to be used with Generac
authorized parts ONLY. If equipment is used with parts
that DO NOT comply with minimum specifications, user
assumes all risks and liabilities.
Risk of eye injury. Spray can splash back or
- propel objects.
• Always wear safety goggles when using this equip-
ment or in vicinity of where equipment is in use.
• Before starting the power washer, be sure you are
wearing adequate safety goggles.
• NEVER substitute safety glasses for safety goggles.
NOTE:
High pressure spray may damage fragile items
including glass.
• DO NOT point spray gun at glass when using red (0 °)
MAX nozzle.
• NEVER aim spray gun at people, animals, electrical
devices or plants.
NOTE:
Improper treatment of power washer can damage it
and shorten its life.
• If you have questions about intended use, ask dealer
or contact qualified service center.
• NEVER operate units with broken or missing parts, or
without protective housing or covers.
• DO NOT by-pass any safety device on this machine.
• DO NOT operate power washer above rated pressure.
• DO NOT modify power washer in any way.
• Before starting power washer in cold weather, check all
parts of the equipment to be sure ice has not formed
there.
• NEVER move machine by pulling on hoses. Use han-
dle provided on unit.
6 OneWASH
TM
Power Washer