Other Functions; Restart Protection - STEINEL PROFESSIONAL HG 2620 E Manual De Instrucciones

Other functions

Restart protection

Restart protection prevents the hot air tool from starting after an interruption in the power supply. The hot air
tool is only ready for operation again after switching it on at the ON/OFF button
LOC function
To avoid altering the chosen settings unintentionally, the HG 2620 E comes with a Lockable Override Control
Function (LOC). To find out how to set the LOC function, please contact our Service Department on
+888-298-8298.
Technical Specifications HG 2620 E
Voltage 120 V, 60 Hz
Output 1750 W max.
Temperature 120-1300 °F, 50-700°C continuously variable
Airflow rate 2-13 cfm, continuously variable
Air pressure 3000 Pa
Delivery nozzle Ø 30 mm, using Professional nozzles
Motor life approx. 10,000 hrs.
Heater life approx. 800 hrs.
Residual heat indicator Yes
Power cord Industrial grade rubber, double insulated
Thermal cut-out Yes
Emission sound pressure level ≤ 70dB (A)
Total vibration value ≤ 2.5 m/s
Weight without power cord 0.84 kg
English
3 .
2 / K = 0.08 m/s 2
Subject to technical modifications
- 10 -
Applications HG 2620 E
Here are some of the applications you can use STEINEL hot air tools for. This selection is by no means
exhaustive – no doubt you can immediately think of other examples.
- Welding bitumen.
- Welding tarpaulins and films.
- Welding PVC floor coverings and linoleum.
- Working rigid thermoplastic materials in plastics and tank construction.
- Shaping thermoplastics.
- Drying wet surfaces.
- Activating and removing glues and hot-melt adhesives.
- Drying and heating processes of all kinds.
Plastic types:
Material Application types
Rigid PVC Piping, fittings, boards, building profiles,
technical molded components, etc.
Welding temperature
550 - 650 °F (290 - 345 °C)
Plasticized PVC Floor coverings, wallpaper, hoses, sheets,
tools, etc.
Welding temperature
550 - 650 °F (290 - 345 °C)
Plasticized PE Domestic and electronic items, toys,
(LDPE) bottles, etc.
Polyethylene Welding temperature
450 - 550 °F (230 - 290 °C)
Hard PE Baths, baskets, canisters, insulating materials,
(HDPE) piping, cellar shafts, transport containers,
Polyethylene waste bins, etc.
Welding temperature
550 - 650 °F (290 - 345 °C)
PP HT drainpipes, plastic chairs, packaging, car
Polypropylene components, equipment housing, technical
moldings, battery boxes, etc.
Welding temperature
450 - 550 °F (230 - 290 °C)
ABS Car components, equipment housing,
suitcases
Welding temperature
625 - 725 °F (330 - 385 °C)
English
Distinguishing characteristics
Incineration test: carbonizes in the flame and
extinguishes on its own
Smoke odor: pungent, of hydrochloric acid
Drop test: crashing
Incineration test: smoking, yellowish-green
flame
Smoke odor: pungent, of hydrochloric acid
Drop test: silent
Incineration test: light, yellow flame,
drops continue to burn
Smoke odor: resembles an extinguished
candle
Drop test: dull
Incineration test: light, yellow flame,
drops continue to burn
Smoke odor: resembles an extinguished
candle
Drop test: crashing
Incineration test: light flame with a blue core,
drops continue to burn
Smoke odor: pungent odor of paraffin
Drop test: crashing
Incineration test: black, fluffy smoke
Smoke odor: sweetish
Drop test: crashing
- 11 -