deuter KID COMFORT ACTIVE Manual De Instrucciones página 11

B
The ergonomically designed, pad -
ded harness system ensures the
highest levels of safety for your child. This helps
prevent any unexpected movements from the
child bringing the bearer off balance. Colour-
coded buckles at the side make the harness sys-
tem clear and easy to operate and access. And
the seat height is easy to adjust, even when the
child is sitting in the cockpit. (3. Adjusting the
5-point safety harness)
C
Two sturdy grab handles make the
Kid Comfort carriers easy to lift onto
the back without additional help. (6. Putting
on and taking off the child carrier)
D
The sun shade option protects the
child's sensitive skin from harmful sun
radiation especially on hot summer days or at
high altitude. The sun shade is available to buy
separately as an accessory for the Kid Comfort
Active, comes included with the Kid Comfort and
comes attached with the Kid Comfort Pro model.
(5. Fitting the sun shade and rain cover)
E
Height adjustable seat means the
child always sits in the ideal position:
the chin level with the upper half of the chin
pad. The width of the seat cushion match-
es the adjusted seat height and, in combi-
nation with the specific foot loop construction,
ensures the sitting posture is ergonomic.
The width increases with the height of the seat
to guarantee a natural slightly splayed 'frog
leg' position; the lower the seat the narrower
the width for a more upright sitting position.
(2. Adjusting the child seat)
F
The simple and safe side entry is
very popular with children who like to
climb into the seat by themselves. It also makes
lifting your child into the carrier easier.
G
The height adjustable foot loops
support circulation to the child's legs
and prevents them from going numb or getting
too cold. The foot loops are flexible, so the child
can change its leg position or sit¬ting position,
yet cannot be used to raise itself out of the seat.
This construction also prevents the child carrier
from swaying during use or tipping over when
down on the ground. (4. Adjusting the height
of the foot loops)
H
The sturdy aluminium frame with
its wide kickstand makes it safe and
easy to load and unload.
I
Specially constructed back systems
guarantee Deuter's high standards of
carry comfort:
LITE AIR SYSTEM
Light and airy with perfect load transfer
The ultra-lightweight, compact, full-contact
back system is directly connected to the frame
of the carrier, ensuring optimum load transfer
and stability, even with very light loads. The Lite
Air back panel sits compactly while the structure
gives it excellent ventilation performance.
AIRCOMFORT SENSIC VARIO
Optimised load transfer with maximum
ventilation
The Sensic System makes innovative use of the
void between the child carrier and the back of
the person carrying it. This is where the Air-
GB