deuter KID COMFORT ACTIVE Manual De Instrucciones página 12

comfort mesh performs its ventilation function
by allowing moisture vapour to escape freely.
The child's centre of gravity remains in the
same position as it does with a full-contact
back system. The back system is directly con-
nected to the frame of the carrier, which has
many advantages: The ergonomic position of
the carrier is maintained, and the load is trans-
ferred effectively due to its close proximity with
the bearer. The special mesh also provides the
bearer with the best possible ventilation.
J
The S-shaped shoulder straps wrap
themselves around the bearer's shoul-
ders, retain their shape and are covered in airy
3D AirMesh fabric for superior comfort.
(See illustration on back cover)
1
Adjust the
carry system
1.1
First, loosen off all the straps. Load the
child carrier with an item(s) that is equivalent in
weight to your child and put it on.
1.2
Position the hip belt on the hip bones
and tighten.
1.3
Now tighten the shoulder straps, but
make sure the majority of the weight remains on
the hip belt.
OPERATION
K
The Pull-Forward system means
the hip fins are easy to tighten even
when the carrier is fully loaded. Kid Comfort,
Kid Comfort Pro: Mobile Variflex ECL hip fins
with ergonomic padding wrap around the
hips and follow the natural movement of your
body. The load is evenly distributed across the
solid pelvic basin. This means less energy is
required to negotiate stairs, uneven ground or
steeper terrain.
L
The back length is fully adjustable in just
a few easy steps, so that either parent
can carry the child carrier. (1. Adjusting the
carry system)
1.4
Perfect position: the shoulder strap an-
chor points are between the shoulder blades.
Use the back length adjustment system to raise
or lower the position of the shoulder straps until
they are at the correct height.
1.5.1
VariSlide: This system lets you adjust the
back length precisely and in no time at all. Lift
the plastic buckle in the centre of the back pan-
a)
el . At the same time, either raise or lower
the shoulder straps to the desired position
1.5.2
VariQuick: Undo the Velcro strap locat-
ed in the middle of the back panel and thread
it through one of the 4 loops
b)
.
a)
. Then pull the