Hilti SF 6H-A22 Manual De Instrucciones Original página 14

5 Operation
Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched
off and that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery
terminals and the contacts in the drill/driver are free from
foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop
out and fall.
▶ Check that the battery is securely seated in the tool so that
it cannot drop out and fall, thereby presenting a hazard to
other persons.
Removing the battery
Fitting and adjusting the side handle
Fitting the belt hook (optional)
WARNING
Risk of injury. A falling power tool may present a risk of injury
to yourself and others.
▶ Check that the belt hook is fitted securely before beginning
work.
Note
The belt hook allows the power tool to be attached to a belt
worn by the operator. The belt hook can be fitted to allow at-
tachment on the left or right side of the body.
Fitting or removing the drill bit
Fitting or removing the bit adapter / bit
Printed: 01.02.2017 | Doc-Nr: PUB / 5329068 / 000 / 00
2
3
4
9
5
5
English 9