Intended Use - Hilti SF 6H-A22 Manual De Instrucciones Original

Ocultar thumbs Ver también para SF 6H-A22:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Electrical safety
▶ Before starting work, check the working area for concealed electric cables
or gas and water pipes. If you damage an electric cable accidentally,
external metal parts of the power tool may become live and present a risk
of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The
power tool may go off course and veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it
down.
2.3 Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and
use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not take apart, squash or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not attempt to charge or continue to use damaged batteries.
▶ If the battery is too hot to touch, it may be defective. In this case, place
the power tool in a non-flammable location, well away from flammable
materials, where it can be kept under observation and left to cool down.
Contact Hilti Service after the battery has cooled down.
3 Description
3.1 Overview of the product
Pivotable side handle
@
Chuck (keyless chuck / hex bit
;
holder)
Torque and operating mode
=
selector ring
Two-speed gear selector
%
switch
Forward / reverse selector
&
switch with safety lock
Control switch (with electronic
(
speed control)

3.2 Intended use

The product described is a hand-held cordless drill / driver. It is designed for
drilling in steel, wood, plastic, cellular concrete and masonry and for driving
and removing screws.
▶ Use this product only with Hilti Li­ion batteries of the B18 / B22 series.
▶ Use only Hilti battery chargers of the C4/36 series with these batteries.
6
English
Printed: 01.02.2017 | Doc-Nr: PUB / 5329068 / 000 / 00
1
Vibration-absorbing grip
)
Illumination
+
Belt hook (optional)
§
Battery
/
Charge state and fault display
:
(Li-ion battery)
Release button with additional
function (charge state display
activation)

Publicidad

Tabla de contenido
loading

Tabla de contenido