Alto Professional Transport 12 Guia Del Usuario página 5

Setup
Items not listed under
Example 1
Example 2
Example 3
Example 4
Introduction > Box Contents are sold separately.
Connect a guitar with an active pickup to the
Mic/Line 1 Input using a 1/4" (6.35 mm) TS cable.
See Operation > Using Microphones & Other
Audio Sources to learn more.
Note: When using Transport 12 with a guitar, we
recommend using one with active pickups rather
than passive pickups. If you use a guitar with
passive pickups, connect it to an external
preamp or direct input (DI) box, and connect the
line-level output to the loudspeaker.
Power on the wireless microphone, set the channel
on the wireless receiver, and then send it to the
wireless microphone. Use the wireless microphone
up to 250 feet (76 meters) away from the receiver.
See Operation > Using the Wireless Microphone
to learn more.
Connect a smartphone, tablet, or other music
player to the RCA inputs using a stereo RCA
cable.
See Operation > Using Microphones & Other
Audio Sources to learn more.
Connect a USB drive with playable music files to
this USB port.
See Operation > Using the USB Player
more.
to learn
5