Allmatic TeleCentric 70 K Manual De Instrucciones página 47

ALLMATIC
On delivery, the support plate (1) is clamped. A transport device can be attached to the support
plate (1).
WARNING
Removal of the support plate during transport.
Serious injuries due to the TeleCentric falling.
Ø Only remove the support plate if the TeleCentric is securely standing on a sub-
strate with sufficient load-bearing capacity.
Ø Always check the support plate for correct fit before lifting.
Removing the support plate
w The TeleCentric is standing securely on a substrate with sufficient load-bearing capacity.
1. Turn outer spindle counter-clockwise until the support plate is free.
2. Remove support plate.
TeleCentric
1
Transport and Storage | 4
47 / 400
EN