Clamping Correctly - Allmatic TeleCentric 70 K Manual De Instrucciones

ALLMATIC
8.2.3

Clamping Correctly

Fig. 12: Position workpiece axis
Workpiece correctly clamped
Workpiece clamped off centre.
Risk of damage to the jaws and the workpiece.
Ø Clamp workpiece centrally.
Fig. 13: Positioning of workpiece
Workpiece correctly clamped
Workpiece clamped at an angle.
Risk of damage to the jaws and the workpiece.
Ø Only clamp the workpiece when lying flat.
Ø Only clamp workpieces of a suitable size.
TeleCentric
Workpiece incorrectly clamped
Workpiece incorrectly clamped
Clamping | 8
EN
63 / 400