Festo AS-Interface ASI-EVA Serie Manual De Instrucciones página 16

2 Connecting and display elements
aA
aJ
9
8
1
7
1 Space for identification signs
(type IBS 6x10, addresses)
2 AS-Interface bus connection
3 ASI LED (power, green),
Fault LED (error, red)
4 DIL-switch for the load voltage
connection
ASI-PWR LED (power, green)
5
6 Sensor connection (inputs)
*) Depends on configuration of DIL switch (see 3.7).
As supplied: outputs can be switched off in the event of
EMERGENCY STOP.
In order to provide power supply to outputs via AS-Interface,
modify the DIL switch setting.
16
7 1 or 2 connecting cables for
outputs (valves)
8 LED status display for:
– outputs (out, yellow)
– inputs (in, green)
9 Additional supply (load volt-
age) for outputs/valves *)
aJ Functional earth connection
(M3)
aA Type plate (ID/IO code)
Festo ASI-EVA... 0208a English
1
2
3
4
5
6