3
Installation instructions
3.1 Fitting
The AS-Interface single valve module can be fitted in one
of the following ways:
–
Hat rail fitting on support rail EN 50022 35x15 with
adapter kit type CP-TS-HS32
–
ITEM profile 40 mm
–
Wand fitting, fitting on cylinder grooves:
– 3 bores for M4 screws
– Longitudinal holes for variable fastening to the cylin-
der grooves
1
1
Fitting onto a hat rail
2
Dimensions of the fastening holes (in mm)
18
2
Festo ASI-EVA... 0208a English