Howtoconnect Electricity; Useofextension Cords - GE 16 Instrucción De Instalación

iMPORTANT SAFETY iNFORMATiON.
READALLiNSTRUCTiONS BEFORE USING. GEA,,IJacescom
AWARNING
HOWTOCONNECT ELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where a standard 2-prong wall outlet isencountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
The refrigerator should always be plugged into its own
individual electrical outlet which has a voltage rating that
matches the rating plate.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires.
Never unplug your refrigerator by pulling on the power
cord. Always grip plug firmly and pull straight out from
the outlet.
Repair or replace immediately all power cords that have
become frayed or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage along its length or
at either end.
When moving the refrigerator away from the
wall, be careful not to roll over or damage the
power cord.
USEOFEXTENSION CORDS
Because of potential safety hazards under certain conditions, we strongly recommend against
the use of an extension cord.
However, if you must use an extension cord, it is absolutely necessarythat it be a UL-listed (in the United States) or
a CSA-listed (in Canada), 3-wire grounding type appliance extension cord having a grounding type plug and outlet
and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.
READ ANDFOLLOW THISSAFETY I NFORMATION CAREFULLY.
SAVETHESE iNSTRUCTiONS
About Energy Smart TMModels
What Energy Smart
TM
Does
If the ACM (Appliance Communication
Module) is connected to your refrigerator and
is receiving utility rate information, then the
Energy Smart
TM
feature alters the
performance of the refrigerator. It minimizes
energy consumption when directed by the
Energy
Snlart
TM
Switch
Models with the EnergySmart TMfeature
have an additional button and LED light on
the controls as shown. The LED will be ON
during high rate periods and OFF during
low or normal rate periods. The button is
Energy Smart TMOverride
Nucleus energy manager (sold separately) or
Smart Meter. This feature can cause changes
in the refrigerator or freezer compartment
temperatures and can cause changes in rate
of ice cube production.
used to disable the EnergySmart
TM
feature
(see "EnergySmart TM override" section).
Press and hold the Energy Smart
TM
button
for 3 seconds to override the Energy
Smart
TM
feature. The adjacent LED will
flash three times to confirm a successful
override of the feature. This will prevent the
feature from altering the performance of
your refrigerator for 18 hours. During this
18 hour period, the LED will remain OFF.
Eighteen hours after the feature has been
disabled, the Energy Smart
TM
feature will
return to its normal operating routine.
3