GE 16 Instrucción De Instalación página 4

About the temperature control dial.
Turning the dial to Off stops cooling in both compartments--fresh food and freezer. It does not shut off power to the refrigerator.
Temperature Control Dial
The temperature dial adjusts refrigerator from warmest to coldest.
See illustrations below for temperature setting information.
Recommened
factory setting Coldest setting Warmest setting
About the fresh food corn artrnent shelves.
Shelf supports at various levels allow you to custom-space your shelves. Not all features are on all models.
i 121
i i iii
rT]Tilt up
Half-Width Shelves
One end of the shelf restson a molded side-
wall support; a bracket on the other end hooks
into a track on the rear cabinet wall.
To remove, lift the shelf up at front, then off
the support and out of the track.
To replace, select desired shelf height. With
shelf front raised slightly, hook the bracket's top
lug into the track, then lower the shelf onto the
support.
NOTE:Theshelfto the rightof the trackisdesigned
to hookintothe right-hand slot;the shelfto the left
is designed t o hookintothe left-hand slot.
Lift rear
Pull f orward
To removethe full-width shelves
Full-Width Shelves
Some models have a steel wire sliding shelf, a
stationary tempered glass shelf,
a spillproof shelf or two steel wire stationary
shelves. These shelves can be moved to
another place in the fresh food
compartment.
The full-width sliding shelf has stop-locks.
When placed correctly on the shelf supports,
the shelf will stop before coming completely
out of the refrigerator and will not tilt when
you place food on it or remove food from it.
Toremove afull-width shelf when
the fresh food compartmentdoor
cannot be opened fully
About the freezer corn artrnent shelves.
SteP,L_ Shelf (on some models)
To remove the step shelf:
I-_ Lift left side of shelf slightly. [_] Lower right side of shelf, move shelf to the
Move shelf to the left to free its right ends _ right and take it out.
_Le_J from holes in the cabinet wall.
4
To replace the step shelf:
-71 ith shelf tilted as shown, fit left ends of
shelf into holes in cabinet wall.
[_ ift left side of shelf slightly, swing shelf up,
fit right ends of shelf into holes in cabinet
wall, and lower shelf into place.